Get the right size and fit for your needs

SNOWBOARD SIZE GUIDE

With the array of snowboard shapes and profiles available nowadays, it can be hard to make a sound decision. Luckily, we have very knowledgeable and experienced staff on hand for our local and visiting customers, but for everybody else, finding the right snowboard can be dreadful when looking for direction and relevant information online.

THERE ARE A NUMBER OF FACTORS THAT COME INTO PLAY WHEN PICKING A NEW BOARD:

  • Riding/Ability Level
  • Snowboard Width
  • Snowboard Length
  • Riding Style and Preferred Terrain

While many snowboards are designed for specific types of terrain and riding styles, others are made to serve a more generalized purpose, kind of a “Jack of All Trades, Master of None”-type of boards. But regardless of your needs, there is a perfect snowboard out there for you and this user-friendly guide will help you narrow it down and pick your next weapon of awesomeness!


Covered on this page:

Snowboard Length

What is the right snowboard length for me? You may have heard that the proper board should be at least as high as your chin, but no higher than your eyes. And while this rule of thumb is still a good starting point to this day, it doesn’t necessarily mean perfect fit anymore given the variety of shapes and profiles available. Both weight and your riding style are to be taken into consideration when trying to choose the right length, as they will affect the range of boards you should be looking at.

For example, if you are a heavier rider, you may want a slightly longer board than recommended for someone of the same height, given that you would require more support from said board. If you spend the majority of your time on the hill off-piste, you may also want a longer board, as it will provide more float and stability in rougher terrain and deeper snow. On the other hand, if you have a more freestyle approach to you riding and prefer the terrain park, a shorter board will allow you to maneuver more easily when doing tricks.

  • Park and Freestyle boards can be ridden a size on the shorter end of the range.
  • Powder and Freeride boards can be ridden a size on the longer end of the range; consider a mid-wide or wide board as well.
  • Consider sizing up if you match a weight range above the size recommended one listed below.
  • If you're just starting out, consider a board on the shorter end of the scale.

See the chart below for reference. Please note that every size overlaps by a couple of centimeters, as those are recommendations and are subject to personal preferences.

Snowboard Size Chart

Height (in) Height (cm) Weight (lbs) Weight (kg) Size (cm)
4'10" 147 110-120 50-54 128-136
5' 152 115-130 52-59 133-141
5'2" 158 125-135 57-61 139-147
5'4" 163 135-145 61-66 144-152
5'6" 168 140-155 63.5-70 149-157
5'8" 173 150-165 68-75 154-162
5'10" 178 160-175 72.5-79 159-167
6' 183 170-185 77-84 160+
6'2" 188 180-195 82-88 160+
6'4" 193 190-205 86-93 160+

 

Riding/Ability Level

What is my riding level? It is important to be honest with yourself when assessing your riding ability in order to select the right board. It doesn’t matter how great of a board it is or how good the people riding it are, if it isn’t a good fit for your build and your riding style, you won’t progress and more importantly, you won’t be having fun riding it.


Riding Style and Preferred Terrain

As we touched on in the first paragraph, some snowboards are designed with a specific use in mind and others meant to be suitable everywhere. While every snowboard can be ridden the way you want, anywhere you desire and in all snow conditions, picking one that is built to suit your needs will increase the likelihood of having a good time and progress into a better rider.


Snowboard Type Descriptions

All-Mountain snowboards are the “Jack of All Trades, Master of None”-type of boards. They will perform equally as good on fresh snow, groomed runs and in the park. These versatile boards are perfect for the majority of snowboarders who want a dependable ride that can take on most terrain types and snow conditions.

Freestyle or Park snowboards are designed to hit man-made and natural features such as; jumps, rails, tree jibs, halfpipes and anything that will get you off the snow. They are also made to ride switch (other foot forward) with ease, as they are often true twin, meaning exact same shape and length on both ends. Some hybrids are qualified as All-Mountain Freestyle. Designed as a directional twin, with a symmetrical shape and a slightly longer nose. Those snowboards are designed to be versatile and playful at the same time, as well as to be ridden on the shorter end of the spectrum.

Freeride snowboards are designed with a stiffer flex and are meant to be ridden in a slightly longer fashion. They are best suited for snowboarders who seek fresh snow and tend to spend all their time on the hill off the groomed runs. Freeride boards are often directional and have a longer nose.

Powder snowboards are, well, designed for powder surfing! They are often seen with funky features such as short, swallow/fish tails and wider/tapered nose. The stance (mounting points) is set back and the tips are rockered to allow better float in deeper snow. This renders a short effective edge but will ensure turning ease and a no catch feel in fresh powder.

Splitboards are built to access zones that would otherwise only be accessible by snowshoes. The upside being weight and versatility, given that you don’t have to carry your snowboard on your back while climbing. Splitboards also float much better than snowshoe in deep snow and allow you to climb steeper ascents due to the climbing skins. Splitboard bindings are required, as well as other touring and safety equipment. Despite having all the appropriate equipment, your most important tool when touring the backcountry is your knowledge. Please visit our friends at BC Ski Guides for more info on getting proper training for your future backcountry outings.


Shapes

Directional Shape:
Found mostly in the freeride, all-mountain and powder snowboard category, the directional shape is meant to be ridden mainly in one direction. Its design offers a slightly longer and softer nose for better float and maneuverability in fresh snow while having a shorter and stiffer tail for a more nimble feel and added carving ability.

True Twin Shape:
The name refers to its identical/twin tips, meaning that both the nose and tail are symmetrical with the same length and flex. This snowboard shape is most often found in freestyle/park boards and is intended to be mounted in the center of the board in order to react and perform the same in either direction.

Directional Twin Shape:
Directional twin can be two things, either a directional board with a longer nose and shorter tail with a twin flex core. Meaning that the flex would be more similar in both tips. Or, it can be a twin shaped board with progressive flex in the nose and stiffer tail. Either of these models will be found in all-mountain/freestyle boards, providing a playful feel on a more versatile platform.

Asymmetrical Shape:
A new wave of snowboards now offers asymmetrical sidecut profiles, core/flex and other unusual features. The idea is that unlike skiing where you should be symmetrical in your edge to edge movement, on your snowboard your flow and amount of weight distributed from your heel to your toe edge is different. Therefore, your board should be shaped and adapted to handle accordingly.


Profiles

Camber:
Camber is the traditional and most popular profile in snowboarding. It offers the most amount of control in the park and on groomed runs as is has the longest effective edge and most amount pop a board can pack. You can recognize a camber board by the arch it creates when put on the ground without any weight on it.

Rocker:
Rocker or reverse-camber, is self-explanatory, being the opposite of the regular camber. This profile offers a looser feel and better float in powder. It does not provide as good of an edge control given its shorter surface contact with the upside being that it is more forgiving and playful than the regular camber.

Flat:
The flat profile is the middle ground between regular camber and rocker board. It offers a better edge hold and precise edging than rocker, but is more forgiving and playful than the regular camber.

Rocker/Camber/Rocker:
Rocker/Camber/Rocker profiles are intended to offer better control than rocker boards, by having an effective edge running from one foot to the other and with both tips leaving the ground early for a more nimble/shortboard feel. It also encompasses the value of rocker in the tips, offering better float than regular camber, by having rockered tips for ease in deep powder. The best of both worlds can be found in the increasingly popular profile found in freeride boards.

Rocker/Flat/Rocker:
This variation is another middle ground trying to offer a better edge hold with a poppier feel while remaining looser and more forgiving than its full camber counterpart.

Camber/Rocker/Camber:
Camber/Rocker/Camber is a profile found mostly in freestyle/park boards. It is designed to offer both the looser feel of rocker boards and the solid edge hold of a camber profile. This profile is most often found in freestyle/park snowboards.

Many other combinations are available and designed with a specific use in mind. Everything can be used on all types of terrain and snow condition, but there is one out there that will suit your personal needs, it is just a matter finding which one feels right to you. Which one may that be you ask? Keep in mind that cambers offer a solid edge hold and generally a better pop, which translates in more control in rougher terrain and at high speed, and for that reason, it is preferred by most advanced park riders. On the other hand, rocker boards are overall more forgiving, provide a looser and less catchy feel, while being surfier and better at floating in powder. Some say that rocker is better for beginners, given its forgiving profile and easy turn initiation. That being said, some advanced riders will prefer rocker boards due to their looser feel. This is just to demonstrate that in the end, the choice is personal and that what is best is what feels right.


Flex Rating

Even though the amount of flex may vary from one board to another and from one company to another, most manufacturers offer a flex rating ranging from 1 to 10, in order to guide customers through the selection of the proper board. Generally, 1-2 is rated as soft, 3-5 medium, 6-8 stiff and 9-10 as very stiff.

Softer Flex:
Softer flex snowboards are usually more forgiving and easier to maneuver at low speed with the downside of not providing as good a board control at high speed. It is ideal for beginners, lighter riders and park riders with a soft spot for rails.

Stiffer Flex:
On the same angle, stiffer flex boards bring more control at high speed and are usually best suited for freeride and backcountry. Stiffer flex will be harder to maneuver easily at low speed, mostly for lighter riders, making the selection of a proper flex for your next board rather important.


Hole Pattern and Binding Compatiblity

Four different snowboard hole patterns are currently used in conventional snowboard building. 2x4 and 4x4 systems being the most common, Burton has developed a few different ones over time: The more traditionally-styled 3D mount and The Channel characterized by it's 2 distinctive channels instead of holes.

Be mindful when choosing your snowboard binding; many brands offer compatibility with different mounting styles, but not every binding is compatible with every board. If you have any questions about whether or not a binding would be an appropriate fit for your board, please get in touch with us and we'll be happy to guide you.

While most companies make mounting discs that are compatible with The Channel, Burton's Channel-specific bindings are called EST and are solely compatible with Channel boards.


Women's Snowboards

Up until a few years ago, snowboard companies made only the one variety of boards with smaller sizes and pretty graphics to entice the women rider demographic. Fast track a few years in the future and women snowboarding is one of the fastest expanding alternative sports with growing numbers worldwide. Women bodies have different attributes and mechanics, and therefore should benefit from equipment designed specifically to accommodate those needs.

Shop Women's Snowboards

Kid's Snowboards

Even though we would all love for our kid's gear to last more than a season or two, it is important, even more so when learning, to find a board that is well suited for the person’s build. Consider that if snowboarding is your passion, you’ll definitely want to increase the odds of your child enjoying the process while learning the ropes, to ensure you get to share more of those precious moments on snow in the future. It will not only help the fun factor but will also make him/her progress faster.

Shop Kid's Snowboards


Durability and Price Range

As price is a decisive factor for most when shopping, it is important to know when it is appropriate to look for deals and when it would be better to wait and save up for something that is worth it. At ComorSports.com, we have a plethora of board selection with the best quality and prices. That being said, depending on your snowboarding needs and preferences, we might be inclined to suggest a variety of different products. The type of wood, laminate, base material and edges are all factors that influence not only the price but the way a board will ride, feel, as well as its durability. If you only find yourself on snow a handful of times a season, you may not find value in spending a lot of money on a high-end board. But again, if you find snowboarding to be more of a passion, something that brings you happiness when you’re down or even your reason for everything, it might be wise to spend a little more on a piece of equipment that will not only last longer, but will feel so good that it’ll make you forget that you are attached to it when gliding on frozen water, letting you enjoy the freedom of the winter wonderland in the way it was designed to. All we can do is ask the questions and you make the decision.

Although feedback and rider reviews are a great way to gain more knowledge, nothing will ever beat demo days where you get to actually ride a board before spending your hard earned money on it. We hope this was helpful and do not hesitate to reach out to us at support@comorsports.com with any snowboard related questions and one of our dedicated specialists will be happy to assist you.