Yes Standard Uninc Snowboard 2023
If your order total is CA$99* or more before taxes, you're eligible for free shipping within Canada on almost all items. Unfortunately we cannot ship bikes & other large items. *Exclusions apply incl Whistler & North Shore inventory.
The Standard UnInc. was created for Dustin Craven, who required greater support and precision than the typical standard board provides. To meet his needs, Yes designed a Directional Volume Twin board with a wide underfoot platform and Slamback inserts for unexpected powder days. The MidBite outline provides exceptional response and edge hold that exceeds expectations for a mid-wide board.
- DIRECTIONAL VOLUME TWIN: As the lines between free-ride and freestyle continue to erase, we had to address the needs of guys committed to riding only twins but finding themselves in more pow. Nose and tail volume is hard to notice in hard-pack unless you’re nose/tail pressing, but in pow it affects floatation and you can feel it. This led to the simple idea of the Directional Volume Twin. Symmetrical flex, centered stance, identical wide-points of the board (therefore, NOT tapered), identical length shovel lengths but with a slightly lower volume tail. The MidBite steps the outline of the board inward 1.5mm just inside the insert pack. This step remains (rather than bumping back out like the Basic) down about 1/3 the length of the sidecut until just inside the next insert pack. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to- edge response. Meanwhile, from your binding out to the end of the sidecut we maintain a board width that is a stable platform for popping, spinning, and landing.
- POPLAR/PAULOWNIA/BAMBOO: Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.
- BASE PROFILE: CAMBER
- SINTERED TRUE: Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
|Board Length (cm)||153||156||159||162|
|Surface Area (dm2)||40,6||42,2||43,8||45,2|
|Tip Length (cm)||25,6||25,9||26,1||26,4|
|Tail Length (cm)||25,6||25,9||26,1||26,4|
|Effective Edge Length (cm)||113,8||116,3||118,8||121,3|
|Contact Length (cm)||101,8||104,3||106,8||109,3|
|Waist Width (cm)||25,3||25,8||26,3||26,8|
|Front Foot Width (cm)||26,6||27,2||27,7||28,2|
|Rear Foot Width (cm)||26,6||27,2||27,7||28,2|
|Tip Width (cm)||29,9||30,5||31||31,2|
|Tail Width (cm)||29,9||30,5||31||31,2|
|Rocker / Camber (mm)||C0.4||C0.4||CO5||C0.6|
|Sidecut Radius (m)||7,4||7,6||78||8|
|Ref. Point (cm)||52,1||54,6||57,2||58,4|
|Ref. Point (in)||20,5||21,5||22,5||23|
|Ref. Stance Setback (mm)||0||0||0||0|
|Min Ref. Stance Width (cm)||48,1||50,6||53,2||54,4|
|Min Ref. Stance Width (in)||18,9||19,9||20,9||21,4|
|Max Ref. Stance Width (cm)||56,1||58,6||61,2||62,4|
|Max Ref. Stance Width (in)||22,1||23,1||24,1||24,6|
|Rider Weight (lbs)||130-190||150-200||160-210||180-220+|
|Rider Weight (kg)||59-86||68-90||72-95||82-99+|
Information provided by manufacturer